/* */

How to Install Replace Change Battery 2001-06 Hyundai Elantra



In this video 1AAuto shows you how to remove, replace, install a battery. This video is applicable to the 2001, 2002, 2003, 2004, 2005, 2006 Hyundai Elantra.

🔧 List of tools used:
• Flat Blade Screwdriver http://1aau.to/oaiq/1AXAA00013
• Phillips Head Screwdriver http://1aau.to/oaiq/1AXAA00013
• 10mm Wrench http://1aau.to/opH/1AXAA00010
• 10mm Socket http://1aau.to/oWm/1AXAA00017
• 12mm Socket http://1aau.to/o5a/1AXAA00015
• Ratchet http://1aau.to/oajK/1AXAA00016
• Socket Extensions http://1aau.to/o5a/1AXAA00015

For More Info visit us at http://1aau.to/h/bgw/

âš  DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

20 comments

  1. √ Watch the Video
    √ Buy The Part at 1A Auto http://1aau.to/m/Visit-1AAuto
    √ Do it Yourself
    √ Save Money

  2. I can't find a replacement for the positive terminal end/connector! What type is it? Mine is cracked. Where can I get a replacement?

  3. I know its a long shot but what if you lose the little cap on the positive lead?

  4. Why so fast? And who held the camera so far away? Why is the man replacing the battery hard to hear?

    This could be improved upon.

  5. Do you know what the positive cable part is called. i stripped the bolt on mine

  6. mine dosnt have the cap or the shild or the bracket that locks the batery in plaice

  7. What is the name of the plastic shroud that you removed from the front of the car and the air filter cover. I would like to replace mine on my 06 elantra.

  8. What happen if the front Bolt will not come out?

  9. Does the car's computer automatically reset itself after the battery is reconnected? Are there any problems I might have with the radio? Just wanted to be sure before I do this. 2006 Elantra. Thank you.

  10. I'm trying to buy the shield & clips that hold down the shield. Anyone know exactly what the shield is called or how I can order one?

  11. I need to change my battery because it does it looks exactly like this but the positive side is stuck. it looks like it was glued down or something. it has like some blue coloring. how can I get the positive side off? thanks in advance.

  12. Very unique positive connector for the battery on a 2004 Hyundai Elantra. Video showed me how to take it off. It was corroded so added baking soda solution. Hope that has allowed it to loosen overnight so I can take it off. I will continue, with knowing better how it works. Thanks.

  13. Thanks for the video! I'm going to be replacing the battery in my girlfriend's mother's car this weekend!

  14. Where do I find the cap you took off the battery post? I replaced the battery on a 2005 Tuscon and it has the type of clamps or covers for the battery post like the positive cable in this video but i now have no way to screw on the cables without a screw coming off the battery post. HELP!!

  15. Thanks for this. My brother was trying to help out a neighbor with battery corrosion and the terminal just would not move.  I had never seen the style he described and without seeing the pieces here I would not have been encouraging him to keep at it.
    Cheers

  16. Will this be basically the same for a 2009 Hyundai Elantra ?

  17. Thank you for this video. It saved me a lot of time and some money when I needed to replace the battery on my 2003 Hyundai Elanyra. Very clear and easy to follow directions.

  18. Nice video; very well done and good visual quality. Also, it might be mentioned not to allow socket wrench to touch metal on car body while tightening negative side to avoid sparks.

Leave a Reply

Your email address will not be published. Required fields are marked *