In this video, I’ll show you how to fix the airbag light and get your horn working on a 1995-2011 Ford Ranger after installing an aftermarket steering wheel.
Did you miss part one of this series? How To Install NRG Aftermarket Steering Wheel with Quick Release – Ford Ranger
______________________________
PROJECT PARTS AND TOOLS
UPDATE: I do not recommend using the small resistors. I’ve burned through 2 of them on my Xterra and two of them in my Ranger. I recently when back and just used the one supplied by NRG. They are 2.2 ohms where the smaller ones I used in this video are only 2 ohms. If your steering wheel adapter did not come with the resistor, you can get them here:
NRG resistor
https://amzn.to/3FeztJu
Solder and Seal Connectors
https://amzn.to/3008Og9
NRG Innovations ST-012S 320mm Sport Suede Steering Wheel
https://amzn.to/2JZ1Vo1
MOMO TUN35BK0B Tuner Black 350 mm Leather Steering Wheel
https://amzn.to/36MMQON
MOMO TUN35BK0S Tuner Silver 350 mm Leather Steering Wheel
https://amzn.to/3dkLCwB
NRG Innovations SRK-162H 6-Hole Hub Adapter Kit [For 97-02 Ford E-Series/F-Series] https://amzn.to/2OR5KfP
NRG Innovations SRK-200BK Quick Release (Black Body/Black Ring) https://amzn.to/2UVmoP0
______________________________
CONNECT WITH ME
Instagram: @rayregno @rayregnogarage
For Business Inquiries ONLY: rayregno@gmail.com
______________________________
FTC LEGAL DISCLAIMER
Some links found in the description box of my videos may be affiliate links. This means that when you purchase products or services using these links, I will make a commission on these sales. This is free for you and is one way to support the channel so that I can keep buying more parts and tools and make more videos! Thanks in advance for your support!
______________________________
LIABILITY DISCLAIMER
Please use the information in this video at your own risk. Neither Ray Regno nor Stronghold Garage will be held responsible for any damages, injury, or loss that could arise from using any information in this video.
______________________________
#fordranger #airbaglight #aftermarketsteeringwheel
source
I don't understand the logic of this video. If your airbag light is on, it indicates that there is a possible issue with your airbag inflating in the event of an accident. Warning lights are warning the users of underlying issues for a reason.
What happens when you try to perform a state inspection?
What resistor goes with Toyota s??
What is the resisters size for Ford 2009 F-150 please ?
my 94 Ranger doesnt have the same guage, mine's more squared in shape, therefore meaning, i dont know where my airbag light is, so that's kind of a problem in my opinion
What code did it give u for the airbag? I replaced clockspring and now I have a airbag 24 code
Whould I do the same thing if I swap seats and it’s a different connector?
Have you figured out the horn
I took the chance and I tested the theory of the steering wheel and the horn and it works
What hub adapter did you use? Can’t seem to find one for my 2004 ranger.
a The Module could be bad. Most likely need to replace the Module. You can buy a used one on http://www.eBay.com
or send your Module for repair at http://www.myairbags.com
Here is video
https://youtu.be/xT5tiT2A78w
thanks for the video.
Any 2 hom works???
My airbag light is out lmao. My truck was crashed twice before I bought it but I hope I can make it nice again
Did you ever figure out the noise when you turn ? I think I figured it out
So I kinda cut my clock spring wire prior to watching this video what do you recommend I do