/* */

How To Repair Samsung Watch SM-R810 Battery Replacement | Repair Tutorial



Send your device in for repair πŸ‘‰ http://bit.ly/2wwrMdQ
Are you a repair ninja? Buy the parts here πŸ‘‰ https://bit.ly/3nD3x6u
Written Repair Guide πŸ‘‰ https://bit.ly/3uyqrQD

Tools used in this repair? Buy the tools here πŸ‘‰
Electronics Precision Screwdriver Repair T5 T2 Torx Phillips Flat Head – Tools

Steps to fix your device.
1. Remove the four screws on the bottom
2. Pry off the bottom cover
3. Unplug the main heart rate sensor from the board
4. Unscrew the main board
5. Unplug all ribbons on the
6. Remove the battery
7. Put in the new battery
8. Connect all the ribbons
9. Screw the board back together
10. Plug in the new heart rate sensor
11. Put on some of the 704 glue on the back housing
12. Put the back housing back on the unit.
13. Screw the unit back together
14. Clean the unit

Feel free to reach out to our radical animal-friendly support team with any questions your brain has developed during the watching or pre-gaming of this video:
www.JoesGE.com πŸ“²
Support@JoesGE.com πŸ“©
360.362.1722 πŸ“ž (Text or Call)

If you are tired of pre-gaming or talking with our radical animal-friendly support team and find yourself pondering the meaning of electronics as a whole, you can ponder them deeper by checking us out on these platforms for social-ish activity:

– Snapchat @joesge
– Instagram @joesge
– Facebook @joesge

JoesGE.com is a pretty cool place (depending who you talk to it might be more than pretty cool. But hey, I’m just writing this down so that it says something down here, because that’s more professional right?) and if you’re still reading along at this point you might as well sit down and grab some popcorn because this is about to trail on about how we are this premiere repair service located in Washington State North of Seattle in basically the “Armpit of the US” near Mt Baker (Mt Baker has the world record for most snowfall at 1,140 inches in a season).

All this to basically say that we are all addicted to coffee and stay in the warehouse for ridiculously long hours in order to keep up with the demands of the youth for these two-sided head audio devices and speakers that float when you throw them in the ocean or in your bathtub to test if they actually float. On top of that, we do like it when less stuff ends up in landfills so we hoard everything on shelves with wheels so that we pollute less, it just sits in our warehouse losing molecules slowly over time degrading to become smaller and smaller.

If you are still reading at this point you deserve an award, or a high five, or something because you must either be the most patient person on the planet, or you read blogs frequently. And if the latter is the case, then this whole thing must seem pretty short so let’s keep going.
We do some really interesting things here at JoesGE which are frequently documented in our sometimes weekly sometimes never vlogs.
Also, if you are wondering how we keep up with the demands of the people so well, its because 90% of the people that work here are all Russian around getting things done most of the time. Yes, that was a pun, you are welcome. We hope you have a pun-filled day, because who couldn’t use a few laughs?

18 comments

  1. I replaced the battery but it won’t turn on after the Samsung logo pops up

  2. The three point screw driver is not in the kit that you offer in the link. I don see it. Only see the four point screw driver philips.

  3. Thanks for the detailed guide! I've followed the tutorial and replaced my battery.. watch says it is charging on screen but doesn't turn on.. have I destroyed a button? Power button feels normal and looks ok internally..

  4. I've changed the battery in my galaxy gear s3 many times with no problem but having issue getting to the battery on my galaxy watch. The side clips keeps a tight grip on the circuit board not letting me reach the battery. Wished they had the batteries on the back like with older watches.

  5. My watch over heats and drains the battery fast like in minutes and only charges up to 60% and drains in about 10 min….i done everything except changing the battery, after seeing your tutorial it gives me the guts to do it myself now,thank youπŸ‘

  6. Great tutorial. Question – Do you need to apply the adhesive to the screws or screw eyelets to prevent water from enter around the screws?

  7. I cant get the screws off useing y00 screwdriver any idea?

  8. Isn't the glue for water ingress? If so there's not much point with broken front is there? Thanks.

  9. I replaced the battery but it won't power up. When I put it on the charger, it connects and says 94%. Any ideas why it won't power up? Thanks.

  10. Nice tutorial! Really helpfull. For me the hardest part was removing the back panel, damn that thing was stuck. But it worked. Thanks!

  11. Is it still waterproof (resistant)?

  12. Hey man …. i wanna know if batery issues makes the watch brick on startin process …. mine when i turns on it just appear the logo screen then he get black screen and shutdown…..please help me.

Leave a Reply

Your email address will not be published. Required fields are marked *