How To Install CCTV Camera Power Adaptor ( SMPS ) | Cctv Camera me SMSP kese Connect Kare | #CCTV
CCTV camera systems often involve technical considerations. To change a 16-channel CCTV camera system’s SMPS (Switched Mode Power Supply), follow these general steps:
1. **Power Off:** Turn off the power to the CCTV system to ensure safety during the replacement.
2. **Identify Power Requirements:** Check the specifications of the new SMPS to ensure it meets the power requirements of your CCTV cameras. Ensure it provides the correct voltage and current.
3. **Document Connections:** Take note or pictures of how the existing SMPS is connected. Document the positive (+) and negative (-) terminals for each channel.
4. **Disconnect Old SMPS:** Disconnect the cables from the old SMPS. Remember which cables correspond to each channel.
5. **Replace SMPS:** Install the new SMPS in the same location as the old one. Connect the cables to the corresponding channels on the new SMPS.
6. **Double-Check Connections:** Verify that all connections are secure and correctly matched according to your documentation.
7. **Power On:** Turn on the power to the CCTV system and monitor for any issues. Ensure the new SMPS is providing power to all channels correctly.
8. **Test Cameras:** Check each camera feed to confirm that the new SMPS is functioning properly and providing power to all channels.
1. #CCTVSMPSChangeGuide #gangwaltech2.0
2. #CCTVInstallationTips
3. #SMPSReplacementHowTo
4. #DIYCCTVSMPS
5. #CCTVTechTips
6. #CameraPowerUpgrade
7. #SecuritySystemSMPS
8. #CCTVSetUpAdvice
9. #PowerSupplySwap
10. #TechTuesdayCCTVUpgrade
#ankurgangwal
